Noorul Islam Centre for Higher Education

Education

B.E - Mechanical Engineering / B.E, Noorul Islam College of Engineering (1996-2000)

Experience

Professor and Head, NICHE (2009-10-01 - Present)
Professor, NICHE (2009-09-01 - 2009-10-01)
Lecturer, NICE (2005-07-28 - 2009-09-01)
Project Associate, National Institute Of Technology, Tiruchirappalli. (2001-12-04 - 2005-07-26)

Journal Publications

Thermo-Mechanical, Tribological and Microstructural Properties of Aluminium AA8011/B4C/Graphene Based Hybrid Composites. by Michael, A., Edwin Raja Dhas J . , Trans Indian Inst Met (2024)
Investigation on Casting Anomalies of Liquid Metallurgy - Processed AA 6061-B4C Composites by 122. V V Monikandan, P V Prasanth, Edwin Raja Dhas J , International Journal of Scientific Research in Engineering and Management (2024)
Comparative Analysis of Flexural Properties of Bamboo-Glass Hybrid FRP Composites: by Nanthagopal, Shalom & Retnam, Stanly , Dev Anand & Edwin Raja Dhas J , Natural and Engineering Sciences (2024)
Evaluation of Fuel Consumption and Exhaust Emissions in a Single Cylinder Four-Stroke Diesel Engine Using Biodiesel Derived from Chicken Waste with Additives by R. Sebastin Nesa Raj ,.B. Stanly Jones Retnam ,.R. Dinesh ,.M. Dev Anand ,.J. Edwin Raja Dhas, Natural and Engineering Sciences (2024)
Improving supplier performance and strategic sourcing decisions by integrating job shop scheduling inventory management and agile new product development by Anil Kumar K and J.Edwin Raja Dhas , Journal of global operations and strategic sourcing , Journal of Global Operations and Strategic Sourcing, (2023), pp. 456-491 (2023)
Parametric optimization of friction stir welded ZE42 rare earth alloys using grasshopper modelling technique by Darwins, A.K., Satheesh, M., J.Edwin Raja Dhas , Int J Interact Des Manuf (2023)
Metallurgical and mechanical investigation on FSSWed dissimilar aluminum alloy by K. Anton Savio Lewise , J. Edwin Raja Dhas , R. Pandiyarajan, S. Sabarish , , Journal of Alloys and Metallurgical Systems (2023)
Solving a job shop scheduling problem, by Anil Kumar K. R. & J. Edwin Raja Dhas , Journal of the Chinese Institute of Engineers (2023)
Mitigation of Make Span Time in Job Shop Scheduling Problem Using Gannet Optimization Algorithm by Anil Kumar K and J.Edwin Raja Dhas , EAI Endorsed Transactions on Scalable Information Systems. (2023)
Manufacturing and experimental characterization of new-developed natural fiber reinforced polymer nanocomposite by Edwin Raja Dhas J, Anton Savio Lewise K, Naveen Kumar Kulandaiyappan, Vijayanandh Raja, C Ahamed Saleel, Mamdooh Alwetaishi, Beena Stanislaus Arputharaj, Ahmed M. Hassan Deif, Hussein A.Z. AL-bonsrulah, , Journal of Materials Research and Technology (2023)
Mechanical Characterization of Bamboo Fiber over Glass and Carbon Fiber Reinforced Polymer Composites of Bamboo Fiber over Glass and Carbon Fiber Reinforced Polymer Composites. Mechanical Characterization by Nanthagopal, Shalom & Retnam, Stanly & Edwin Raja Dhas J , International Journal of Advanced Trends in Engineering and Management (2023)
A. Specific Fuel Consumption and Exhaust Emission Test on Single Cylinder Four-Stroke Diesel Engine using Polyethylene Extract Biodiesel as Fuel by 106. Rajesh, S. P.; Retnam, B. Stanly Jones; Dhas, J. Edwin Raja; Lenin, A. Haiter; Manjunathan, , International Journal of Vehicle Structures & Systems; Chennai (2022)
Microstructure and mechanical properties of friction stir spot welded dissimilar aluminum alloys by K Anton Savio Lewise, Edwin Raja Dhas J & R. Pandiyarajan , Journal of the Chinese Institute of Engineers (2022)
), Effect of coconut shell nanopowder reinforcement in the development of palm fiber composites by 107. Edwin Raja Dhas J, Savio Lewise KA, Kumar KN,Raja V, AL-bonsrulah HAZ, Ahmad H, Yao S-W and Al-Bahrani M, Front. Mater. (2022)
FSSW process parameter optimization for AA2024 and AA7075 alloy by K. Anton Savio Lewise & J. Edwin Raja Dhas , Materials and Manufacturing Process (2022)
Effects of hydrogen and chicken waste blends in the internal combustion engines for superior engine performance and emission characteristics assisted with graphite oxide by Dinesh R. and Stanly Jones Retnam Dev Anand and M. Edwin Raja Dhas J. , Aircraft Engineering and Aerospace Technology (2022)
Challenges on machining characteristics of natural fiber-reinforced composites – A review by Sonia S Raj , J Edwin Raja Dhas and CP Jesuthanam, , Journal of Reinforced Plastics and Composites (2021)
Parameter optimisation of fibre reinforced polymer composite by RSM design matrix by Sonia S. Raj , P. Pradeep and J. Edwin Raja Dhas , Int. J. Computer Aided Engineering and Technology (2021)
Designing and Modelling of Delta Wing Genetic-Based Prediction Model by Arun M.P, Satheesh M , J.Edwin Raja Dhas , International Journal of Ambient Computing and Intelligence (2021)
Optimization of responses in electron beam welding of inconel-718 alloy using genetic algorithm approach by 103. Vishnu, S; Satheesh, M; Edwin Raja Dhas; Ramanan, G, International Journal of Advanced Technology and Engineering Exploration; Bhopal (2021)
Multi Response Optimization of Process Parameters using Taguchi based Grey Relational Method in FSW of AZ91B Magnesium Alloy, by Unnikrishnan, M A; J.Edwin Raja Dhas , International Journal of Vehicle Structures & Systems (2021)
Influence of Temperature on Mechanical and Microstructural Properties during FSW of Magnesium Alloys by Unnikrishnan M A, Edwin Raja Dhas.J , Journal of Green Engineering (2020)
Mechanical and Microstructural Characterization of Friction Stir-Welded AA2219: TiCp-Reinforced Composites by J. Edwin Raja Dhas & Jenkins Hexley Dhas, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering (2020)
Development of Taguchi based Grey Relational Analysis Optimization for FSW of AZ31B Magnesium Alloy by M.A. Unnikrishnan, J. Edwin Raja Dhas and S. Shanavas , Int. J. Vehicle Structures & Systems, (2020)
ASTM /ASME standards comparison on UTS of Friction stir welded Magnesium alloys by Unnikrishnan M A, Edwin Raja Dhas.J , Solid State Technology (2020)
Characterization, wear surface roughness and tensile failure analysis of Al7075-TiC-MOS2 hybrid composites using online acoustic emission by G Ramanan S Suresh, N Rajesh Prabha and J Edwin Raja Dhas , Mater. Res. Express (2019)
Effect of Welding on Pitting and Intergranular Corrosion Behavior of Marine Grade Aluminum Alloy by S.Shanavas, J. Edwin Raja Dhas , Materials Performance and Characterization (2019)
A Review on Friction Stir Spot Welding Joints of Dissimilar Aluminium by K. Anton Savio Lewise, J. Edwin Raja Dhas, Alloys International Journal of Recent Technology and Engineering (2019)
Optimization of Aerodynamic Parameters of Cropped Delta Wing with Fence at Sonic Mach Number by Arun M.P, Satheesh M , J.Edwin Raja Dhas , Journal of Computational and Theoretical Nanoscience (2019)
Morphological and Comparative Characterization of Silk/Bamboo Fiber Reinforced Epoxy Composite by . S. Subash, B. Stanly Jones Retnam, J. Edwin Raja Dhas, M. Sivapragash , International Journal of Recent Technology and Engineering (2019)
Investigation on Microstructural Examination of Flux Bounded TIG Weldments in Post Weld Heat Treated State by P. D. Skariya, M. Satheesh, J. Edwin Raja Dhas, and G. Chandrasekar, Journal of Computational and Theoretical Nanoscience (2019)
Analysis on mechanical and metallurgical characterisation of FBTIG weldments using 15CDV6 steel by P.D. Skariya; M. Satheesh; J. Edwin Raja Dhas; G. Chandrasekar, International Journal of Nano and Biomaterials (2019)
Design, Analysis and Manufacturing of Multiple Drill Bit Assembly by M Prasath, A. Stalin, Subin Dev R, J Edwin Raja Dhas, Journal of Advancement in Machines (2019)
Weldability of marine grade AA 5052 aluminum alloy by underwater friction stir welding by S.Shanavas, J. Edwin Raja Dhas and N.Murugan, International Journal of Advanced Manufacturing and Technology (2018)
Investigations on Effect of Activated Carbon Addition on Al6061 Metal Matrix Composite by Diju Samuel, G., Edwin Raja Dhas, J, Journal of Global Engineering Problems & Solutions (2018)
A Comprehensive Review to Study the Role of Air Conditioning and Air Flow Improvements in Small Passenger Vehicles by Shamim Ibrahim, R.C. Mehta , J. Edwin Raja Dhas, Journal of Advanced Research in Dynamical and Control Systems (2018)
Development of Probabilistic Neural Network Model for Weld Quality Prediction, Engineering and Technology by John Edwin Raja Dhas, Moni Satheesh, , Engineering and Technology (2018)
Experimental Investigations of Nano Enhanced Hybrid Facesheets by M.R. Arun, J. Edwin Raja Dhas, and B.Stanly Jones Retnam , Journal of Advancements in Material Engineering (2018)
Experimental Investigation of Hybrid Bamboo/Glass Fibre Reinforced Polyester Composites by Bino Prince Raja D, B Stanly Jones Retnam, J.K Bhusan and Edwin Raja Dhas J , Elixir Materials Science (2018)
Introduction to Natural Fibres and Modification of Fibres to Meet Process Difficulties by Edwin Raja Dhas.J, Pon Sudhir Sajan. S. S , Introduction to Natural Fibres and Modification of Fibres to Meet Process Difficulties (2018)
Development and characterization of silk/bamboo/glass nano polymer composites by S. Subash, B. Stanly Jones Retnam, J. Edwin Raja Dhas, International Journal of Mechanical and Production Engineering Research and Development (2018)
A study of PFTIG and FBTIG welding process on bead morphology using nanoparticles on 15cdv6 steel by P. D. Skariya, M. Satheesh, J. Edwin Raja Dhas, and E. Suneesh , International Journal of Mechanical Engineering and Technology (2018)
A study on PFTIG welding process for the improvement of mechanical properties by P. D. Skariya, M. Satheesh, J. Edwin Raja Dhas, and E. Suneesh , International Journal of Mechanical Engineering and Technology (2018)
Optimizing parameters of TIG welding process using grey wolf optimization concerning 15CDV6 steel by P.D. Skariya, M. Satheesh, J. Edwin Raja Dhas , Evolutionary Intelligence (2018)
Experimental investigation of pftig welding process on 15cdv6 steel using nanopowders by P. D. Skariya, M. Satheesh, J. Edwin Raja Dhas, and E. Suneesh , International Journal of Mechanical and Production Engineering Research and Development (2018)
, Effect of alkali treatment and nano filler addition on properties of palm/glass fiber reinforced polymer composite by P.Pradeep, J. Edwin Raja Dhas, Indian Journal of Engineering & Materials Sciences (2018)
Response surface methodology assisted multi-objective optimization of TIG process for 15CDV6 steel by Skariya, P. D.; Satheesh, M., J. Edwin Raja Dhas; Chandrasekar, G, Control & Cybernetics (2018)
Response Surface Modeling and Grey Relative Analysis to Optimize the Wire Edm Machining Parameters with Multiple Response Characteristics by G. Ramanan, J. Edwin Raja Dhas, International Journal of Control Theory and Applications (2017)
Effect of Process Parameters on the Microstructure and Mechanical Properties of Al6061/Powdered Activated Carbon Metal Matrix Composite by G.Diju Samuel and J.Edwin Raja Dhas, International Journal of Control Theory and Applications (2017)
Neural Network Prediction and Analysis of Material Removal Process during Wire Cut Electrical Discharge Machining by G. Ramanan, J. Edwin Raja Dhas, REST Journal on Emerging trends in Modelling and Manufacturing (2017)
) Experimental Investigation and Multi Response Optimization of WEDM Process of AA7075 Metal Matrix Composites Using Particle Swarm Optimization by Ramanan Gopalakrishnan, Edwin Raja Dhas John, International Journal of Intelligent Engineering and Systems (2017)
Multi Objective Optimization of Machining Parameters for AA7075 Metal Matrix Composite Using Grey - Fuzzy Technique by G. Ramanan, J. Edwin Raja Dhas, International Journal of Applied Engineering Research (2017)
Multiple Response Characteristics Optimization ofAA7075 composites by Response Surface Grey Relative analysis by Ramanan.G, Neela Rajan.R.R., Diju Samuel.G, Edwin Raja Dhas J , Rajesh Prabha.N and Pradeep.P , International Journal of Mechanical Engineering and Technology (2017)
Effect of Tic and MoS2 reinforced aluminium metal matrix composites on microstructure and thermogravimetric analysis by Rajesh Prabha N ,J. Edwin Raja Dhas, Rasayan Journal of Chemistry (2017)
Design optimization of surface roughness by turning process using response surface methodology and grey relational analysis by Rajesh Prabha N ,J. Edwin Raja Dhas, International Journal of Mechanical Engineering and Technology (2017)
) Finite element structural analysis of connecting rod of AA7075-TiC composite using ANSYS by Rajesh Prabha N ,J. Edwin Raja Dhas, International Journal of , Mechanical Engineering and Technology (2017)
Mechanical Characterization on Woven Bidirectional Natural Fiber Reinforced Polymer Composites by D.Bino Prince Raja, Stanly Jones Retnam. B, Edwin Raja Dhas.J, International Journal on Future Revolution in Computer Science & Communication Engineering (2017)
A Comprehensive Review of Aluminium – Boron Carbide Matrix Composites by Edwin Raja Dhas.J, Pon Sudhir Sajan. S. S, Journal of Mechanical Engineering and Applied Mechanics (2017)
Multi Response Prediction of Machining Process Parameters Using Artificial Neural Network by Ramanan G, Edwin Raja Dhas J and Jai Aultrin K S, International Journal of Mechanical Engineering and Technology (2017)
Optimization of Friction Stir Weld Parameters Using Response Surface Method for Hybrid Non Ferrous Composites by G. Diju Samuel and J. Edwin Raja Dhas , International Journal of Mechanical Engineering and Technology (2017)
Experimental Investigations on Mechanical Properties of treated and Untreated Natural Fibre Reinforced Polymer Composite by P. Pradeep and J. Edwin Raja Dhas, Journal of Material Science & Manufacturing Technology (2017)
Analysis of Weld Parameters on Dilution for Low Alloy Steel, by J. Edwin Raja Dhas and M Satheesh, Advances of Production Engineering and System Technology (2017)
Parametric optimization of friction stir welding parameters of marine grade aluminium alloy using response surface methodology by S.Shanavas, J. Edwin Raja Dhas, , Trans. Nonferrous Met. Soc. China (2017)
Application of Intelligent techniques to model welding process parameters by J. Edwin Raja Dhas, Journal of Global Engineering Problems & Solutions (2017)
Die Life Prediction of Connecting Rod SIFL-175 by P.D. Skariya, M. Satheesh, J. Edwin Raja Dhas , International Journal on Future Revolution in Computer Science & Communication Engineering (2017)
Effects of alkali treatment on mechanical properties of NFPRC by F.Peter, V.Jose Vino, P.Pradeep, J. Edwin Raja Dhas , Journal of Emerging Technology in Mechanical Sciences and Engineering (2016)
Characterization of palm fibers for reinforcement in polymer matrix by P.Pradeep, J. Edwin Raja Dhas, Suthan R. and Jayakumar V, ARPN Journal of Engineering and Applied Sciences (2016)
Effect of TiCp on AA2219 Metal Matrix Composite by Jenkins Hexley Dhas. S and Edwin Raja Dhas. J. , Global Research and Development Journal for Engineering (2016)
Comparison of mechanical properties for hybrid palm/glass/rare earth filler reinforced polymer composite by P. Pradeep and J. Edwin Raja Dhas , ARPN Journal of Earth Sciences (2016)
Investigation on optimization of wear properties on Aluminium hybrid metal matrix using Taguchi method by Rajesh Prabha N ,J. Edwin Raja Dhas, Visakh, S , International Journal of Innovations in Engineering & Technology (2016)
A Comprehensive Survey on Friction Stir welding of Magnesium alloys by M.A. Unnikrishnan and J. Edwin Raja Dhas , International Journal of Mechanical and Production Engineering (2016)
Evolutionary SVM modeling of weld residual stress by Edwin Raja Dhas J and Somasundaram , Applied Soft Computing (2016)
Multi-Objective Optimization of friction stir welded dissimilar aluminium composites using grey analysis by G. Diju Samuel and J. Edwin Raja Dhas (, International Journal of Applied Engineering Research (2016)
Influence of activated carbon particles on microstructure and thermal analysis of AA7075 metal matrix composites by G. Ramanan, J. Edwin Raja Dhas, M. Ramachandran and G. Diju Samuel, Rasayan Journal of Chemistry (2016)
Performance assessment of heat exchanger using intelligent decision making tools by Ahilan C, Edwin Raja Dhas J , Somasundaram Kumanan and Sivakumaran N , Applied Soft Computing (2015)
Multi Objective Optimization of FCAW parameters using Grey based Taguchi with entropy Technique by M.Satheesh and J. Edwin Raja Dhas, International Journal of Industrial and Systems Engineering, (2015)
Comparative study of tensile properties on Thermoplastic & Thermosetting polymer composites by M Aniber Benin, B Stanly Jones Retnam M. Ramachandran, M Sivapragash and J Edwin Raja Dhas, International Journal of Applied Engineering Research (2015)
Mechanical Characterization of jute fiber over glass and carbon fiber reinforced polymer composites by 41. P. Pradeep J. Edwin Raja Dhas M. Ramachandran and B Stanly Jones Retnam, International Journal of Applied Engineering Research (2015)
Investigations on Alkali Treated Natural Fiber Reinforced Polymer Composite by Finite Element Analysis by P. Pradeep and J. Edwin Raja Dhas , Journal of Mechanical and Mechanics Engineering (2015)
Application of RSM and ANFIS models for machining Quality Prediction by J. Edwin Raja Dhas and P.Pradeep , Alloy Journal of Soft Computing and Applications (2015)
Preparation of Al 7075 - PAC Metal Matrix Composites and Evaluation of Mechanical Properties by Ramanan G and J Edwin Raja Dhas, International Journal of Applied Engineering Research (2015)
Evaluation of mechanical property on palm/coir based polymer matrix composites by P. Pradeep and J. Edwin Raja Dhas , Advances in Materials Science and Engineering: An International Journal (2015)
Characterization of chemical and physical properties of palm fibers by P. Pradeep and J. Edwin Raja Dhas , Advances in Materials Science and Engineering: An International Journal (2015)
Friction Stir Welding Of Magnesium Alloys a Review by M.A. Unnikrishnan and J. Edwin Raja Dhas , Advances in Materials Science and Engineering: An International Journal (2015)
Tensile and flexural characteristics of palm/glass sandwiched Polymer Composite by P. Pradeep and J. Edwin Raja Dhas , , Journal of Mechanical and Mechanics Engineering (2015)
A review for friction stir welding of aluminium composite for aerospace applications by G.Diju Samuel and J.Edwin Raja Dhas, Journal of Emerging Technology in Mechanical Sciences and Engineering (2014)
Modified Stir Casting of Metal Matrix composites by G.Ramanan and J.Edwin Raja Dhas , Journal of Emerging Technology in Mechanical Sciences and Engineering (2014)
Multi Objective Optimization of Weld parameters of Boiler Steel using Fuzzy based Desirability Function by M.Satheesh and J. Edwin Raja Dhas, Journal of Engineering Science and Technology Review (2014)
Hybrid Taguchi method for optimizing flux cored arc weld parameters for mild steel by M.Satheesh and J. Edwin Raja Dhas, Advances in Production Engineering and Management Journal. (2014)
Neuro Evolutionary Model for Weld Residual Stress by John Edwin Raja Dhas and Somasundaram Kumanan , Applied Soft Computing (2014)
Multi Objective Optimization of Flux Core Arc Weld parameters using Hybrid Grey - Fuzzy Technique by M.Satheesh and J. Edwin Raja Dhas, The Journal of Engineering Research (2014)
Overview of ultrasonic welding in Automobiles by P.Pradeep and J. Edwin Raja Dhas, , Journal of Emerging Technology in Mechanical Sciences and Engineering (2014)
Mechanical Property Evaluation on Aluminium Based Metal Matrix Composite Reinforced with Grahite and Nickel Coated Graphite by N.Rajesh Prabha, S.Suresh and J.Edwin Raja Dhas, International Journal of Engineering Research & Technology (2014)
Processing and Characterization of AA2219-TiCp Reinforced Composite by S. Jenkins Hexley Dhas and J. Edwin Raja Dhas , International Journal of Applied Engineering Research (2014)
Modeling and prediction of HAZ using finite element and neural network modeling by J. Edwin Raja Dhas and S. Kumanan, Advances in Production Engineering and Management Journal. (2013)
RBF neural network model for machining quality prediction by J.Edwin Raja Dhas, R.S. Stalin and J. Rajeesh , International Journal of Modeling Identification and Control (2013)
Sensitivity analysis of Sensitivity analysis of submerged arc welding parameters for low alloy steel weldmentsubmerged arc welding parameters for low alloy steel weldment by J. Edwin Raja Dhas and M.Satheesh, Indian Journal of Engineering and Material Science (2013)
Multi Objective Optimization of Flux Cored Arc Welding parameters using Fuzzy based Desirability Function by M.Satheesh and J. Edwin Raja Dhas, Transactions of Mechanical Engineering (2013)
Modeling and Prediction of machining quality in CNC turning process using intelligent hybrid decision making tools by Ahilan C, Somasundaram Kumanan ,Sivakumaran N and Edwin Raja Dhas J, Applied Soft Computing (2013)
Effect of fiber orientation on Mechanical properties of Nano Frp Composites by B.Stanly Jones Retnam, M. Sivaprakash and J. Edwin Raja Dhas , International Journal on Design and Manufacturing Technologies (2013)
Multiple objective optimization of submerged arc welding process parameters using grey based fuzzy logic by J. Edwin Raja Dhas. and M. Satheesh , Advances in Production Engineering and Management Journal. (2012)
Prediction of Weld Quality using intelligent decision making tools by J.Edwin Raja Dhas, Somasundaram Kumanan and C.P.Jesuthanam , International Journal of Artificial Intelligence Research (2012)
Multi objective Optimization of Welding using Grey relational analysis with Entropy measurement by J. Edwin Raja Dhas and M.Satheesh, Journal of Manufacturing Technology Research (2012)
Multi objective Optimization of Weld parameters using PCA and Entropy Techniques in Taguchi method by M.Satheesh and J. Edwin Raja Dhas, Journal of Mechanical Engineering (2012)
Multiple objective optimization of Submerged Arc Weld process parameters using Grey based Taguchi method by J. Edwin Raja Dhas and M.Satheesh, International Journal of Industrial and Systems Engineering (2012)
Optimization of Parameters of Submerged Arc weld using Non Conventional techniques by J. Edwin Raja Dhas and S. Kumanan, Applied Soft Computing (2011)
Weld Residual Stress Prediction using Artificial Neural Network and Fuzzy Logic Modeling by J. Edwin Raja Dhas and S. Kumanan, Indian Journal of Engineering and Material Science (2011)
Effect of Welding Parameters on Dilution in Low alloy steel weldment by M.Satheesh and J. Edwin Raja Dhas, Journal of Emerging Technology in Mechanical Sciences and Engineering (2011)
Modelling of residual stress in Butt Welding by J. Edwin Raja Dhas and S. Kumanan, Materials and Manufacturing Processes (2011)
Weld quality prediction of submerged arc welding process using Function Replacing Hybrid by J. Edwin Raja Dhas and S. Kumanan, Advances in Production Engineering and Management Journal. (2010)
Effects of Process parameters in bead geometry and hardness in submerged arc weld on mild steel by J. Edwin Raja Dhas and S. Kumanan, National Journal of Technology (2010)
Neuro hybrid model to predict weld bead width in submerged arc welding process by J. Edwin Raja Dhas and S. Kumanan, Journal of Scientific & Industrial Research (2010)
Modelling and optimisation of submerged arc welding process parameters using particle swarm optimisation technique by J. Edwin Raja Dhas and S. Kumanan, International Journal of Enterprise Network Management (2010)
Local Selection – An integrated PSO with Fuzzy clustering approach by Kumanan Somasundaram, K.Kumar and J. Edwin Raja Dhas , Journal of Emerging Technology in Mechanical Sciences and Engineering (2010)
Prediction of weld bead width in Submerged Arc Weld of Mild Steel using fuzzy logic modeling by J. Edwin Raja Dhas and S. Kumanan, Journal of Manufacturing Engineering (2009)
Neural Network Modelling of Electron Beam Welding by J. Edwin Raja Dhas and S. Kumanan, International Journal of Advanced Engineering Applications, (2009)
Prediction of weld bead geometry in SAW using regression method by J. Edwin Raja Dhas and S. Kumanan, Manufacturing Technology Today (2007)
ANFIS for prediction of weld bead width in SAW Process. by J. Edwin Raja Dhas and S. Kumanan, Journal of Scientific and Industrial Research (2007)
Determination of Submerged Arc Welding process parameters using Taguchi method and regression analysis by S. Kumanan J. Edwin Raja Dhas and K. Gowthaman, Indian Journal of Engineering and Material Science (2007)
Fluid-structure interaction of cropped delta wing with experimental validation by Arun M.P, Satheesh M , J.Edwin Raja Dhas , International Journal of Mechanical and Production Engineering Research and Development (485)

Books Published

Futuristic Tends in Mechanical Engineering, ISBN: IIP, Publisher: IIP

Patents

No patents available.

Conferences

No conferences available.

Projects

Dr. Edwin Raja Dhas.J - Conversion of IC Engine Maruthi Zen to Electric Vehicle

Faculty Development Programs (FDP)

No FDPs available.

Online Courses

No online courses available.

Events Organized

J.Edwin Raja Dhas - National Science Day
J.Edwin Raja Dhas - INTELLIGENT UNDER WATER AUTONOMOUS ROBOTS FOR OCEAN MONITORING
J.Edwin Raja Dhas - GATEWAY TO RESEARCH
J.Edwin Raja Dhas - Educational awareness

Awards

J.Edwin Raja Dhas - Best Paper Award - Presentation of Paper on International Conference on Recent Advances in Mechanical Engineering , ICRAME .
J.Edwin Raja Dhas - Award for Producing 100% result in subject Production Planning and Control for Anna University Examinations.
J.Edwin Raja Dhas - Appreciation for Scopus Publications
Dr. J.Edwin Raja Dhas - ? Best paper Award for paper titled “Optimization and Analysis of abrasive wear of Agro waste reinforced composites by RSM design matrix ” of the International Conference on Energy and Materials Technologies (ICEMT-2021) organized by the department of Mechanical Engineering, SSNCE on Aug 20-21: 2021, Tamilnadu INDIA.
Dr. J.Edwin Raja Dhas - Certificate of Appreciation for paper titled "Opposition based genetic optimization algorithm with Cauchy mutation for job shop scheduling problem " Presented in the International Conference AIES 2021 , Kerala, INDIA.

Guest Activities

No guest activities available.

Additional Contributions

No additional contributions available.

N/A

Address