News Update:
Dr. Rajesh. R
Dr. Rajesh. R

Associate Professor & HOD

rajesh200345@yahoo.co.in

Education
  • Ph.D - Mechanical Engineering, Noorul Islam Centre for Higher Education, Kumaracoil. (2015)
  • M.E. - Manufacturing Engineering, C.S.I.Institute of Technology,Thovalai. (2007)
  • B.E - Mechanical Engineering, C.S.I.Institute of Technology,Thovalai. (2005)
Experience
  • Head of the Department of Mechanical Engineering, Noorul Islam Centre for Higher Education,Kumaracoil (2021-10-13 - 2024-09-10)
  • Associate Professor, Noorul Islam Centre for Higher Education, Kumaracoil. (2017-02-28 - Present)
  • Assistant Professor, Noorul Islam Centre for Higher Education, Kumaracoil. (2009-03-06 - 2018-02-27)
  • Site Engineer, BBAE, Dubai (2008-07-03 - 2009-02-02)
  • Lecturer, Einstein College of Engineering,Tirunel Veli. (2007-06-04 - 2008-06-02)
Journal Publications
  • Extraction and characterization of biofber from the Phoenix sylvestris leaf sheath biowaste for probable reinforcement in polymer composites by Aravind Ambika Gangadharan,Rajesh Resselian,Dev Anand Manoharan, Biomass Conversion and Biorefnery (2024)
  • DESIGN AND ANALYSIS OF CYLINDER AND CYLINDER HEAD OF SIX STROKE SI ENGINE FOR WEIGHT REDUCTION by R. Rajesh , Giju Mon DK, Conference Proceeding(NCRAET2024) (2024)
  • A REVIEW OF NATURAL FIBRE COMPOSITES CHARACTERIZATION by Siga selvin, R. Rajesh, M. Dev Anand, Conference Proceeding(NCRAET2024) (2024)
  • MECHANICAL PROPERTIES OF AL-6061 COMPOSITE COORDINATED WITH TITANIUM CARBIDE BY MIX PROJECTING INTERACTION by Anu Kuttan, R. Rajesh, M. Dev Anand, Conference Proceeding(NCRAET2024) (2024)
  • DESIGN AND FABRICATION OF AUTOMATIC SHREDDER MACHINE by R.Rajesh , Berbin K, Conference Proceeding(NCRAET2024) (2024)
  • DESIGN AND FABRICATION OF ALARM SYSTEM IN ACCIDENT ZONE by R.Rajesh , Gowtham B , Guru Vignesh E, Conference Proceeding(NCRAET2024) (2024)
  • DESIGN AND FABRICATION BIOMASS BRIQUETTING MACHINE by R.Rajesh, Collin Eric M, Shaji Akash A C, NCRAET2K24(Conference Proceeding) (2024)
  • Mechanical Properties Of Al-6061 Composite Coordinated With Titanium Carbide By Mix Projecting Interaction by R.Rajesh, Conference Proceeding(NCRAET2024) (2024)
  • Characterization of novel cellulosic fiber from agro-waste Licuala grandis leaf stalk for sustainable reinforcement in bio-composites by Kumar, SSD; Resselian Rajesh and Manoharan, DA, Biomass Conversion and Biorefinery (2024)
  • Static and modal analysis of turbine rotor blade at an angle of 21° by Makam Praneeth Kumar; G. Surya Prakash Rao; R. Rajesh, AIP Conference Proceeding (2024)
  • A REVIEW ON GREEN CORROSION INHIBITORS FOR MAGNESIUM AND ITS ALLOY by PRAVEEN D DETHAN , RAJESH. R & M. DEV ANAND , Journal of the Balkan Tribological Association (2024)
  • Employing Aluminum Matrix Composite for Stir Casting Process for Investigating the Performance of A1-6061 by A. Anu Kuttan, R. Rajesh & M. Dev Anand , Journal of The Institution of Engineers (India): Series D (2023)
  • Laser Beam Welded Aluminum-Titanium Dissimilar Sheet Metals: Neural Network Based Strength and Hardness Prediction Model by Sudhin Chandran, R Rajesh, M Dev Anand, The Computer Journal (2023)
  • Optimization-Based Hybrid Intelligent Model for Decision Making on Electrical Discharge Machining (EDM) Process of A6061/6%B4C and A6061/9%SiC Composite Materials by C. S. Shyn, R. Rajesh and M. Dev Anand, Cybernetics and Systems (2022)
  • Mechanical and Thermal Characterization of Hemp/Rice-Husk/E-Glass Fiber Cardanol Epoxy Matrix Hybrid Composites by Albert seldon and R.Rajesh, Journal of Natural Fibers (2022)
  • Laser Beam Welded Aluminum-Titanium Dissimilar Sheet Metals: Neural Network Based Strength and Hardness Prediction Model by Sudhin Chandran, R Rajesh, M Dev Anand, The Computer Journal (2022)
  • Impact of heat treatment on laser beam welded aluminium (A6061)-titanium (Ti6al4v) dissimilar sheet metals by S.Sudhin Chundran,R.Rajesh and M.Dev Anand, AIP Conference Proceedings (2021)
  • Abrasive water jet machining techniques and parameters: a state of the art, open issue challenges and research directions by Anu Kuttan, A., Rajesh, R., Dev Anand, M., Journal of the Brazilian Society of Mechanical Sciences and Engineering (2021)
  • Optimization algorithms and intelligent techniques on electrical discharge machining process by Shyn, C.S., Rajesh, R., International Journal of Modeling, Simulation, and Scientific Computingthis link is disabled (2021)
  • Investigation on Post-Weld Heat Treated Titanium-Aluminum Dissimilar Laser Welded Joint by Chandran, S., Rajesh, R., Anand, M.D., Journal of The Institution of Engineers (India): Series C (2021)
  • Investigation on Post-Weld Heat Treated Titanium-Aluminum Dissimilar Laser Welded Joint by S.Sudhin Chundran,R.Rajesh and M.Dev Anand, Journal of The Institution of Engineers (India): Series C (2021)
  • Multi-response optimization of process parameters for laser beam welding of AA6061-Ti6Al4V by grey relational analysis by S.Sudhin Chundran,R.Rajesh and M.Dev Anand, Materials Today: Proceedings (2021)
  • Abrasive water jet machining techniques and parameters: a state of the art, open issue challenges and research directions by A, Anu Kuttan, R. Rajesh, M. Dev Anand, Journal of the Brazilian Society of Mechanical Sciences and Engineering (2021)
  • Optimization algorithms and intelligent techniques on electrical discharge machining process by C. S. Shyn, R. Rajesh, and M. Dev Anand, International Journal of Modeling, Simulation, and Scientific Computing (2021)
  • • Review of aluminium 6061 metal matrix composites fabricated using stir casting method and applications by C. S. Shyn, R. Rajesh, and M. Dev Anand, AIP Conference Proceedings (2021)
  • Analysis of mechanical properties and optimization of laser beam welding parameters on dissimilar metal titanium (Ti6Al4V) and aluminium (A6061) by factorial and ANOVA techniques by S.Sudhin Chundran,R.Rajesh and M.Dev Anand, Materials Today: Proceedings (2021)
  • Laser beam welding: research state of the art on performance and measures by S.Sudhin Chundran,R.Rajesh and M.Dev Anand, Control & Cybernetics (2020)
  • A6061/B4C MMCs fabrication, experimental investigation and prediction of properties by C. S. Shyn, R. Rajesh, and M. Dev Anand, IOP Conference Series: Materials Science and Engineering (2020)
  • Development of Optimized EDM Parameters for LM25 Aluminium Composite Using Prediction Tool by R. Rajesh, N. Muhammedshafi, A. Mohammed, R. Jishnu, Shiyan Shihab, Shine B Chandran, Jour of Adv Research in Dynamical & Control Systems (2019)
  • A Review – Studies on heat treatment of Laser Beam Welded Ti,/Al dissimilar sheet metals, Journal of advanced research in dynamical & control systems by S.Sudhin Chundran,R.Rajesh and M.Dev Anand, Journal of Advanced Research in Dynamical and Control Systems (2019)
  • PSO Research on Cutting Parameters in AWJM Process for Aluminum 6061 Alloy by K.S. Jai Aultrin, M. Dev Anand, R. Rajesh, S. Muthu Sherin, Journal of Recent Technology and Engineering (IJRTE) (2019)
  • Prediction of EDM Process Parameters for AISI 1020 Steel using RSM, GRA and ANN by R.Rajesh and M. DevAnand, International Journal of Recent Technology and Engineering (2019)
  • Prediction of Electrical Discharge Machining Process Parameters by Artificial Neural Network Based on Response Surface Method by P. Gopu, M. Dev Anand and R. Rajesh, Journal of Advanced Research in Dynamical and Control Systems (2018)
  • Modeling and Analysis of MRR and SR in EDM of AISI 1020 through RSM by R.Rajesh and M. DevAnand, Journal of Chemical and Pharmaceutical Sciences (2016)
  • Development of Hybrid Modeling and Prediction of SR in EDM of AISI1020 Steel Material Using ANFIS by R.Rajesh and M. DevAnand, Indian Journal of Science and Technology (2016)
  • Prediction of EDM Process Parameters for a Composite Material using RBFNN and ANN through RSM by R.Rajesh and M. DevAnand, Indian Journal of Science and Technology (2016)
  • A survey on current research trends in electro discharge machining and their performances on MRR, TWR and SR by R.Rajesh and M. DevAnand, Journal of Chemical and Pharmaceutical Sciences (2016)
  • ANFIS-based surface roughness prediction model for EDM of aluminium-based composite material by R. Rajesh , M. Dev Anand , P. Gopu , E. Raja Sherin , International Journal of Enterprise Network Management (2016)
  • Fibre Reinforced Plastic Material with Aluminum Filling Used for Ship Superstructure by Dev Anand M , K.A. Janardhanan , R. Rajesh , D. Ramachandran., Journal of Chemical and Pharmaceutical Sciences (2016)
  • Advanced Machining Performance Study on Hardened Steel EN 31: A Differential Evaluation Approach by Xavier Irudhya Raj Y , Rajesh R , Dev Anand M2 , Rohit IJ, Journal of Chemical and Pharmaceutical Sciences (2016)
  • Study and Analysis of a Cryogenic Pressure Vessel Design for the Storage of Liquefied Natural Gas by M. Dev Anand , R. Rajesh , K.A. Janardhanan , I.J. Rohit, Journal of Chemical and Pharmaceutical Sciences (2016)
  • Surface Roughness Prediction Using Adaptive Neuro Fuzzy Inference System Model in EDM by R. Rajesh, M. Dev Anand, and P. Gopu, International Journal of Applied Engineering Research (IJAER) (2015)
  • • Investigation on Optimal Process Parameters in EDM of LM25 Al/15%SiCp Using Response Surface MethodologyThrough Mathematical Modeling, by R.Rajesh and M. DevAnand, International Journal of Applied Engineering Research (2014)
  • • Improvement of Optimal Process Parameters in EDM of Aluminium Based Alloy and Composite Materials Using RSM by R.Rajesh and M. DevAnand, Journal of the Association of Engineers (2014)
  • Experimental investigation on aluminium composite surface machined by electrical discharge machining process using response surface methodology by R.Rajesh and M. DevAnand, Journal of Mechanical Engineering (2013)
  • Hybrid modeling of process parameters produced by electric discharge machining using differential evaluation and particle swarm optimization by R.Rajesh and M. DevAnand, journal of advanced manufacturing systems (2013)
  • The Optimization of the Electro-Discharge Machining Process using Response Surface Methodology and Genetic Algorithms by R.Rajesh and M. DevAnand, Procedia Engineering (2012)
  • Determination of an optimum parametric combination using a surface roughness in EDM process through response surface methodology by R.Rajesh and M. DevAnand, International Research Journal of Engineering Science, Technology and Innovation (IRJESTI) (2012)
Books Published
  • Futuristic Trends in Mechanical Engineering,, ISBN: Edited book series, Publisher: IIP
  • Product Level Planning and Control, ISBN: Book(, ISBN: 978-81-973185-7-3,DOI:https://doi.org/10.59646/plpc/183), Publisher: San International Scientific Publications
  • Product Level Planning and Control, ISBN: Book(, ISBN: 978-81-973185-7-3,DOI:https://doi.org/10.59646/plpc/183), Publisher: San International Scientific Publications
Patents
  • No patents available.
Conferences
  • No conferences available.
Projects
  • Dr. Rajesh. R - PMKVY 4.0 Skill Development Program
Faculty Development Programs (FDP)
  • No FDPs available.
Online Courses
  • No online courses available.
Events Organized
  • No events organized.
Awards
  • Dr. Rajesh. R - Reviewer Award for reviewing IEEE Sensor Journal papers
  • Dr. Rajesh. R - Reviewer Award for reviewing IEEE Sensor Journal papers(Fiber Optic Sensors For Online Detection Of Corrosion Degree Of Stone Artifacts) on 09/11/2023
Guest Activities
  • No guest activities available.
Additional Contributions
  • No additional contributions available.
Back